I need help getting Windows 10 to install on my KVM.
When the machine starts it shows the Windows loading screen for a second and immediately shows a BSOD “SYSTEM THREAD EXCEPTION NOT HANDLED”.
I’ve tried multiple ISOs, modded and vanilla, based on different updates of Windows 10 and 11, I can’t even get into the setup at any of them, any help appreciated.
QEMU Settings are:
Chip: Q35
FW: BIOS (UEFI only gives shell with any UEFI options)
CPU: 4 vCPU (Default setting I think)
RAM: 8 Gigs
Boot settings: No boot menu
#1 SATA CD-ROM (Windows ISO)
#2 SATA HDD (empty 300GB qcow2)
#3 SATA CD-ROM (VirtIO drivers)
Network is default
Video is VirtIO, tried all the other options too, but to no avail
HOST runs on:
OS: Arch Linux 6.5.5-zen1-1-zen
CPU: AMD Ryzen 5 1600
RAM: 16GB
GPU: NVIDIA GeForce GTX 1050 Ti (Nouveau driver)
You must log in or register to comment.
Have you tried with a stock kernel instead of zen?
And windows doesn’t support virtio video, use qxl.
Zen kernel should be fine. I’ve been running it for 4 years and haven’t had any issues specific to zen.
I’ve tried on zen and lts, I don’t have the stock kernel
Windows does support VirtIO if you load the drivers at setup. QXL doesn’t help either, also tried VGA, same problem.
There are a lot more settings that could be relevant.
Tell me what u need and I tell you what I have
CPU settings, including how your actual bios is configured. It kind of sounds like something isn’t turned on.
Enabled: SVM mode (CPU virtualization) TPM 2.0 Secure Boot
Disabled: Windows 10 WHQL support Legacy Boot
Anything else is pretty much default
Does anything else work? For example, can you boot a Debian live disk? What about a Debian install on a VM? This will help isolate the problem to internal or external of the hypervisor.
I’m not in a position to check at the moment, but I think I used to have to set the CPU to something older (like, very old Core2Duo).
I’ve tried all the CPU settings in virt-manager, my HOST runs Windows 10 just fine, still crashes if I use Host or nearest ro host in virt-manager
Is your CPU set to run on 4 sockets instead of core/thread combo in 1 socket?
deleted by creator
To me this reads like a driver issue. You could try loading Windows VirtIO drivers during installation and see if that fixes the issues.
that’s the thing, I BSOD right before the setup
deleted by creator
yeah maybe
