I was thinking of installing a shade sail to my house with 2 of the points anchored to my house. The type of sail I’m installing is a square type I found on Amazon. Does anyone have any thoughts on whether this is safe in the event of high winds? Some videos I’ve found suggests the most you need to do is make sure you’re tying into the end of a roof rafter… I know how to locate that, but I’m still a little nervous high winds could damage that part of my roof. Anyone have experience with this? Am I being too paranoid with this as a concern?

    • girthero@lemmy.oneOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      edit-2
      1 year ago

      12’ x 12’. I was going to use a steel cable anchored 2 points to 6x6 posts and the other 2 points into the roof rafters with a sturdy hook screw through the fascia into the roof rafters with this. My plan is similar to this video.

      • brad@mander.xyz
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        I think that will work fine… You might put some carabiners on the cirners so you can take it down if you know there is going to be some bad weather.

        You could also look at the rafters and tie the one you are anchoring to to another one close.

      • roblarky@beehaw.org
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I would recommend doing something like what I did in this photo. I originally just did a simple hook like you posted, but some very high winds bent it, and it was somewhat loose - I still don’t know how it stayed in.

        I cut a piece of angled steel, drilled holes, and painted with white Plastidip. Then used some nylon spacers with the marine hook. I have not had any issues at all, it’s been 7 months and they’re rock solid.

        • girthero@lemmy.oneOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Looks nice!.. So do you have one of the bolts going through the rafter behind the fascia then?

          • roblarky@beehaw.org
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Yeah. There are also 2x4s running parallel behind the fascia (which are attached to the rafters), so it’s really sturdy and anchored.