Its IP65 if the headphone jack isnt covered. Per the manufacturer’s website for this phone model:
The device has been tested for water resistance using IEC 60529 standard and has achieved an IP65/68 rating. Water and dust resistance can deteriorate over time in normal usage, or if the device is damaged, repaired or taken apart. The device should never be completely submerged underwater, and should not be allowed to come into contact with seawater, brine, chlorinated water or drinks. Failure to observe correct precautions will invalidate the device warranty and the function of water and dust resistance. Water resistance is tested by submerging the device to a depth of 1.5 meters in tap water for 30 minutes. After the test the device is removed and fully dried, then checked for normal operation. Please note that the device has a USB-C charging port, and this USB-C port must be completely dry before any attempt is made at charging. For related warranty information, please refer to the product warranty card.
I don’t see that mentioning anything about covering the headphone jack before the test. As I understand it, being ip65/68 means it’s both, where 65 is “low power spray” and 68 is “immersion”, not that it’s 68 only if some unspecified conditions are applied
Asus zenphone 10, for example. IP68, headphone jack
I’m sure there are and have been others
Its IP65 if the headphone jack isnt covered. Per the manufacturer’s website for this phone model:
I don’t see that mentioning anything about covering the headphone jack before the test. As I understand it, being ip65/68 means it’s both, where 65 is “low power spray” and 68 is “immersion”, not that it’s 68 only if some unspecified conditions are applied
I am sorry, I am unable to find any kind of video that shows the Asus Zenfone 10 IP68 test.
I do see this post though: https://zentalk.asus.com/t5/zenfone-10/welp-think-my-zenfone-10-just-died/td-p/414686
As well as a notice from Asus: https://www.asus.com/support/faq/1046136/